Table of Contents
Advertisement
ASSEMBLY
• Install new Large Rubber Seal to machined
groove (FIG 13).
• In order, reassemble over center boss, metal
deflector (flange up), cup, filter, metal end
cap and tighten wing nut securely (FIG 14).
• Reinstall Canister to Housing and tighten
socket head cap screws with included
5mm Hex Key.
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 13
FIG. 14
4-3/4"
Post
Large
Rubber
Seal
9
Advertisement
Table of Contents
