Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Eastwood 31633
- Page 1 Item #31633 COMPLETE FILTRATION SYSTEM INSTRUCTIONS...
-
Page 2: Specifications
(1) Regulator (1) Regulator Key (1) Pressure Gauge (1) 5mm Hex Key (1) 8” Adapter Stem (To accept optional Eastwood #51567 or DeVilbiss #130524 Desiccant Kit) SPECIFICATIONS • 1/2” NPT Female Inlet • 1/4” NPT Male Outlet • Maximum service pressure: 150 PSI (10.3 bar) •... -
Page 3: Safety Information
• This Air Filter/Regulator can quickly release moisture and other debris while connected to an air supply causing serious personal injury. Always shut off the air supply to the Air Filter/Regulator and depressurize before draining moisture, changing desiccant or other maintenance. To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 4: Installation
• Connect the air inlet to the 1/2” FNPT at the cast-in, “AIR IN” port of the Housing • Be sure to connect outlet to a clean air hose to prevent contamination of the filtered & dried air. • Open inlet valve to pressurize system and check for leaks. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com... -
Page 5: Maintenance
(FIG 3). Open • Allow accumulated moisture to drain. • When moisture stops flowing, rotate the Petcock in a Clock- wise direction (as viewed Close from the bottom) to close. To order parts and supplies: 800.343.9353 >> eastwood.com... - Page 6 DEVILBISS 130524 DESICCANT KIT This unit can be easily retrofitted with the optional FIG. 4 130521 Devilbiss Desiccant KIt (Eastwood Item #51567) which will add air drying capability to this unit in addition to moisture removal. Shut-off and release all pres-...
- Page 7 Rubber Seal, thread on wing nut Small and tighten securely (FIG 9). Rubber Seal • Reinstall Canister to Housing and tighten socket head cap screws with included 5mm Hex Key. FIG. 9 To order parts and supplies: 800.343.9353 >> eastwood.com...
- Page 8 • Save wing nut, metal end cap, cup, and metal deflector for reassembly (FIG 12). FIG. 12 • Dispose of old Filter and large rubber Seal. Re-use Save reassembly Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
- Page 9 (flange up), cup, filter, metal end Large Rubber cap and tighten wing nut securely (FIG 14). Seal • Reinstall Canister to Housing and tighten socket head cap screws with included 5mm Hex Key. FIG. 14 To order parts and supplies: 800.343.9353 >> eastwood.com...
- Page 10 NOTES Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
- Page 11 NOTES To order parts and supplies: 800.343.9353 >> eastwood.com...
-
Page 12: Additional Items
#51537 RapidAir Master Garage Air Line Kit #13600 RapidAir 3/4” Professional Compressed Air Line Kit #32499 Eastwood 50’ Retractable Air Hose Reel with Hybrid Flex Polymer Hose #70449 Eastwood 3/8” x 50’ Retractable Air Hose Reel #32153 Tru-Flate HI FLO Aluminum Couplers &...