Step 5: Insert Sd Card Into Dc-1 Camera; Step 6: Check Firmware Version; Step 7: Delete Firmware File From Sd Card - Techalogic DC-1 Firmware Update

5. Place the SD card into your DC-1 Camera and power on. Please wait for it to automatically
update itself. The light/s will flash erratically for a short while. Once the lights are steady again
the update is complete
6. Now navigate to the settings menu in the App and check the firmware version to ensure
the firmware has been successfully updated. The current firmware version number is listed on
our support page next to where you downloaded the .bin file
7. Finally once updated successfully delete the .bin file from the sd card otherwise the camera
will update every time you power it on
Thank you for choosing Techalogic
If you have any questions regarding the operation of your camera, please don't hesitate to contact us and we will be
more than happy to assist you.