Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Concept2 Smoke Screen SANIHAZE
Summary of Contents for Concept2 Smoke Screen SANIHAZE
- Page 1 SANIHAZE USER MANUAL VERSION: 09/04/2020...
- Page 2 Thank you for purchasing the Concept Smoke Screen Sanihaze fog generator. Before using the machine, we recommend you read the operating instructions carefully. Please follow the safety and maintenance requirements to ensure a long operating life for your generator.
- Page 3 INSTRUCTIONS AND NOTICES For any queries, please contact Concept Smoke Screen for further guidance. • Keep the generator dry. • Only power the generator from a grounded socket to reduce the risk of electric shock. • Before powering the generator, ensure that the AC supply voltage matches the voltage specifications of the generator e.g.
- Page 4 INDEX OF TERMS • Fluid tank - unscrew the lid to refill with fluid • Fluid level indicator - check the fluid levels • Power switch - turn the machine on/off • Mains cable - plugs into a wall socket to give the machine power •...
- Page 5 With the power connected, the generator will begin to heat up. While the generator is heating, it is not capable of producing fog. During heating, the red LED located on the handle will flash. Once the correct temperature has been achieved, the LED will turn solid. WIRELESS TRANSMITTER Battery: DC 12V 27A battery Transmitting distance: The nominal range of the transmitter is 50m...
- Page 6 ENROLLING ADDITIONAL TRANSMITTERS The transmitter supplied with the generator has been pre-enrolled at the factory and does not require pairing. The receiver is capable or enrolling up to 5 additional transmitters. Transmitters may also be enrolled to multiple generators (enabling one transmitter to trigger several generators simultaneously) When the generator is first powered on, the green LED located near the receiver will flash for 15 seconds indicating the enrolment period.
- Page 7 CALCULATING THE AMOUNT OF ACTIVATIONS REQUIRED The generator creates a sufficient concentration of fog at a rate of 20m3/minute. To calculate the volume of the area that you are interested in sanitising, multiply the length, width and height of the area. This will give you the volume in m3. Divide the volume by 20 and this will tell you the number of minutes that one generator will need to produce fog for.
- Page 8 SANIHAZE (08/04/2020) Concept Smoke Screen Limited North End Business Park, Station Rd, Swineshead, Lincolnshire, PE20 3PW United Kingdom Tel: +44 (0) 1205 821111 | Fax : +44 (0) 1205 820316 | info@smoke-screen.co.uk | www.smoke-screen.com...
Need help?
Do you have a question about the Smoke Screen SANIHAZE and is the answer not in the manual?
Questions and answers