Prevue Pet Products Catville Quick Start Manual

TOWER
Catville
™
Model: # 7240 (Gray)
read first
REVIEW BEFORE ASSEMBLY
• Designed for hand assembly. For assistance or replacement
No tools required. parts, please contact Prevue Pet
Products:
• Check regularly to ensure all
components are connected.
PHONE
ONLINE
• Place finished unit in an area
EM IL customerservice@prevuepet.com
with room for cats to play and
interact with all features.
CARE INSTRUCTIONS
• Spot clean fabric and frame with
• Do not immerse in water
or place near high heat or
open flame. • Supervise pet interaction with
• Regularly check the stability of
all connections of components.
a
1
To form the BASE (pt.1), you
will need these pieces:
P RTS N ME QTY
3C
3-Way Corner ( 3 )
4 C 4-Way Corner ( 3 )
5C
5-Way Corner ( 2 )
A35 Long Tube ( 10 )
c
1
*
Then you will need these pieces:
P RTS N ME QTY
4 C
4-Way Corner ( 1 )
5 C 5-Way Corner ( 3 )
6C
6-Way Corner ( 2 )
A35
Long Tube ( 7 )
G
Play Floor ( 1 )
G2
Escape Floor ( 1 )
a
2
Assemble the base (pt.2), and
add it to base (pt.1) to form the
complete base unit.
To form the BASE (pt.2), you
will need these pieces:
P RTS N ME QTY
2 S
2-Way Straight ( 1 )
3 S
3-Way Straight ( 4 )
3 C
3-Way Corner ( 2 )
4 C
4-Way Corner ( 1 )
5C
5-Way Corner ( 1 )
A35
Long Tube ( 7 )
A 6
Short Tube ( 4 )
B 2 8
Short Curve ( 2 )
c
2
To form the 1st floor HIDEAWAY
DEN, you will need these pieces:
P RTS N ME QTY
3 S
3-Way Straight ( 2 )
4 C
4-Way Corner ( 4 )
A35
Long Tube ( 2 )
A 6
Short Tube ( 6 )
B 3
Long Curve ( 4 )
L3 Hideaway Den ( 1 )
7240 — 12 / 14 — A3
312.243.3624
www.prevuepet.com
a moist towel. Allow to air dry
thoroughly.
the product. Inspect for wear.
Replace when worn.
Lay the components out on the floor,
then insert tubes into connectors to
assemble the base (pt.1).
When building sections with fabric pieces,
insert long tubes into the sleeves of the
fabric piece first, then add the connectors.
Made in China for Prevue Pet Products, Inc., Chicago IL USA
connectors & parts
2S 3S 3C
( 2 pcs) (16 pcs)
A1 A35
Sisal Post Long Tube
A16
(3pcs) (56pcs)
Short Tube
(18pcs)
L3
L2
Hideaway Den
Hideaway
(2pcs)
Penthouse
(1 pcs)
1
Secure the velcro sleeves around the
horizontal tubes. Across the center (from G1
to G2), wrap the velcro flap across the tube
and secure it to the matching velcro strip.
2
After the hideaway den is assembled, add it
to the base, and secure the velcro sleeves
around the horizontal tubes at top
and bottom as shown.
4C 5 C
( 7 pcs) (18 pcs) ( 9 pcs)
B31
G1
B28 Long Curve
Play Floor
Short Curve (16pcs)
(1pcs)
(8pcs)
D2 H
Hideaway Corner (1pcs) Hammock Floor (1pcs)
b
To begin the 1st floor, you will
need these pieces:
P RTS N ME QTY
A35
Long Tube ( 5 )
A Sisal Post ( 1 )
•
b
Assemble the unit, then
add it to the base.
To continue the 1st floor, you
will need these pieces:
P RTS N ME QTY
4 C
4-Way Corner ( 1 )
5 C
5-Way Corner ( 1 )
A35
Long Tube ( 4 )
A Sisal Post ( 1 )
•
www.prevuepet.com 312 243-3624
6C
( 2 pcs)
M1
G2 Square Plush Mat
Escape Floor
(1pcs)
(1pcs)
M2
Corner Plush Mat
(2pcs)
S1
Ramp (1pcs)
M3
Rectangle Plush Mat
(3pcs)
Add the assembled
unit to Step 1b.
customerservice@prevuepet.com