2
Introduction
LED Pin
When it is set to 1&2, the LED turns on when alarm happens, when it is set to 2&3,
the LED turns off. It is set to be 1&2 by default.
Sensitivity Pin
Sensitivity is high when it is set to 1&2, and low when it is set to 2&3. It is set to
high sensitivity by default.
LED Indicator Status
Red light fast flashes
Red light is on for 2s,and then turns off
Red light slowly flashes for three times,
and then tuns off
Device Status
Booted up or pairing with Alarm Station
Pairing succeeded
Pairing failed
2