Advertisement
Quick Links
trigLOC mounting
Install trigLOC select axial direction
Allen key 5mm
trigLOC adjust trigger rotation
Loos upper bolt
Allen key 5mm
Installation manual
Define trigger orientation
by inserting the pin into the
corresponding position
Tighten upper
bolt
Allen key 5mm
Germany
Communication
Phone
Adjust tilting
and tighten the clamp
Take off SRAM
trigger mount interface
carefully
Please pay attention to the 4° indexing:
The pin has to be insert always into
the opposed holes
Attention:
Small loose part
Advertisement
Related Manuals for Vecnum trigLOC
Summary of Contents for Vecnum trigLOC
- Page 1 Install trigLOC select axial direction Adjust tilting and tighten the clamp Allen key 5mm trigLOC adjust trigger rotation Loos upper bolt Take off SRAM Attention: trigger mount interface Small loose part carefully Allen key 5mm Installation manual Please pay attention to the 4° indexing:...
- Page 2 Replace cable return spring (moveLOC dropper post only) Loosen cable clamp at universal Remove remote cable Remove cable and Install new cable return remote and remove lever from dropper post existing cable spring and cable into return spring cable housing Allen key 2.5mm Cable installation Pay attention to the...