Advertisement
Measuring
Item
instrument
SUB COLOUR-1 Remote
control unit
Test point
Adjustment part
[2.V/C]
10.COLOUR
(PAL/SECAM/NTSC)
Description
[Method of adjustment without measuring instrument]
PAL COLOUR
(1) Receive PAL broadcast.
(2) Set the ZOOM mode to FULL.
(3) Set the PICTURE MODE to STD.
(4) Select 2.V/C from the SERVICE MENU.
(5) Select < 10.COLOUR >.
(6) Set the initial setting value of < 10.COLOUR >.
(7) If the colour is not the best with the initial set value,
make fine adjustment until you get the best colour.
(8) Press the [MENU] key and memorize the set
value.
SECAM COLOUR
(1) Receive the SECAM broadcast.
(2) Make fine adjustment of SECAM COLOUR in the
same manner as for above.
NTSC 3.58 COLOUR
(1) Input the NTSC 3.58MHz signal from the EXT
terminal.
(2) Make similar fine adjustment of NTSC 3.58
COLOUR in the same manner as for above.
NTSC 4.43 COLOUR
(1) When NTSC 3.58 COLOUR set, NTSC 4.43
COLOUR will automatically set.
(No.YA063)1-31
Advertisement
