Page 1
ENGLISH User and Service Manual Metro Fixed-Tilt READ INSTRUCTION BEFORE USING SAVE THIS BOOK FOR FUTURE REFERENCE...
Page 2
Customer Service Support Toll Free: 1-844-US Mobility (844-876-6245) Phone: (310) 618-0111 Fax: (310) 618-8811 Email: convaidsales.us@etac.com International Email: international.convaid.us@etac.com Website: www.etac.us.com Technical assistance or repair information hours are: Monday-Friday, 6 a.m. to 4:30 p.m. PST Before Calling: Please fi ll in the following. Customer Service will be able to help you more quickly if the information indicated below is readily available.
The latest version of all instructions and product safety notices are available on the Convaid website (www.etac.us.com) and can be printed in larger sizes. Additional video instructions are also available for reference purposes.
Page 5
CONVAID USER’S GUIDE This symbol indicates a wheelchair which cannot be used in motor vehicle as vehicle seat. This wheelchair does not comply with WC19 (RESNAWC-4:2012 for ISO7176-19:2008) and cannot be used as a vehicle seat to transport the user in a vehicle. The Symbol indicates a wheelchair which can be used in motor vehicle as vehicle seat.
CONVAID USER’S GUIDE General Warnings WARNING: To avoid tipping, do not hang item from ! the push handle. WARNING: Ensure the wheels are installed properly. You will hear a “click” when wheel locks into place. WARNING: Always secure user with belt first, before making any other adjustments.
CONVAID USER’S GUIDE Unpacking Unpacking the Chair Check to see that the following items are included with the chair: • Left and right footplates • Accessories as ordered • Hex wrench (5/32)
CONVAID USER’S GUIDE Set-up and Adjustments Unfolding 1. Lay chair flat on ground and unbuckle closure strap. Fig. 1 2. Stand chair on front caster, grasp side of Push Handle and push down on Seat Tube. Fig. 2 3. Press down firmly on seat tubes to ensure the chair is completely unfolded.
CONVAID USER’S GUIDE Folding 1. Swing footplates to the side. Fig. 7 & 8 2. Unlock Rear Lock Brace by kicking up on center of brace with foot. Fig. 9 3. Grasp one side of Push Handle and pull up on seat fabric or seat tube with opposite hand. Fig.
CONVAID USER’S GUIDE Fitting Guide Convaid’s lightweight, folding chairs are designed to be more than just a convenient chair. Order the correct size chair by first determining the user’s height, weight and seating measurements. Properly-fitted, Convaid chairs will provide years of comfortable use. Correct seating and positioning encourages good posture, which in turn aids circulation, breathing and digestion.
CONVAID USER’S GUIDE Seat Depth Measure from the most posterior portion of the buttocks to the back of the knee. Subtract from that measurement 25 mm - 51 mm to allow adequate clearance between the seat and the back of the knee. Fig. 16 Fig.
CONVAID USER’S GUIDE Wheels Quick Release Wheels TIRE REMOVAL 1. To remove, press down and hold the Rear Wheel Locking Pin. Grasp wheel and pull. 2. No tools are required to remove tire. Fig. 17 Fig. 18 Fig. 19 TIRE INSTALLATION 1.
CONVAID USER’S GUIDE Locking and Unlocking Convaid manufactures two types of wheel locks: hand operated and foot operated. Check to see which type of wheel locks is on your chair. WARNING: Proper care and maintenance must be taken to ensure proper function of the foot operated brakes.
CONVAID USER’S GUIDE Operating Instructions Three-Point Positioning Belt The three-point positioning belt is optional with your Metro chair. Adjust the belt so the user stays securely in position. The quick-release buckle is attached to the crotch strap, and joins the crotch strap to both belts.
CONVAID USER’S GUIDE Adjustable Footplates Adjustable footplates can be moved fore and aft, sideways. To adjust the angle, loosen the two bolts located on the footplate and move to desired position. Retighten the bolts. Fig. 28 - 30 Fig. 28 Fig.
CONVAID USER’S GUIDE Footplate Height Adjustment Seat-to-footplate height is measured from the back of the knee to the bottom of the heel. Feet or heels should rest comfortably on top of footplate. (Fig. 35) All Convaid footplates are height adjustable. Footplates swing away for access or folding.
CONVAID USER’S GUIDE Accessories Underseat Storage Basket 1. Connect Center Button Strap by looping it over Rear Cross Brace and snapping button to back of basket. Fig. 44 2. Loop Side Button Strap over Chair Tubing (just above the Rear Axle Assembly), and snap button shut.
CONVAID USER’S GUIDE Transit Option The wheelchair transport model has been crash tested and performed satisfactorily at 30 mph/20 g deceleration. Convaid conforms to RESNA WC19 standards. Dummy weights are: All Metro Models Model ME12T..66lbs / 30kg Model ME14T..100lbs / 45.5kg Model ME16T..170lbs / 77kg Model ME18T..170lbs / 77kg To reduce possibility of injury, the headrest extension must...
CONVAID USER’S GUIDE Important Information Maintenance, Operating & Safety Instructions WARNING: • For increased safety, the seat belt should be used at all times. • Do not leave user unattended. • Do not strap user too tight. • Straps should not interfere with breathing or circulation •...
Page 21
CONVAID USER’S GUIDE 4. Safety Instructions • Follow folding/unfolding instructions. • Never leave occupied chair unattended. • Do not attempt to take occupied chair up or downstairs, escalators, steep inclines, or icy or slippery surfaces. • To avoid tipping, do not overload the chair, or hang heavy items on the handles that might cause tipping.
Page 22
CONVAID USER’S GUIDE • When going down a curb, approach the curb backwards. Lower the rear wheels down the curb and continue backwards, taking the weight off the front wheels so they can be gently lowered. • When transferring user to or from chair, apply foot wheel locks. •...
Page 23
CONVAID USER’S GUIDE Check for functionality and/or damage Weekly Every 3 Every 6 of the following: months months necessary Rims and tires • Wheel lock and hand brakes • Accessories • Front and rear wheel axles • Cleaning & lubricating all moving parts* •...
Page 24
CONVAID USER’S GUIDE Cleaning of fabric cover Seat and back upholstery can be easily removed, washed, air dried and reattached to the chair. Use standard detergent to wash fabric. Cushioned parts can also be removed from chair, washed or wiped off with a moist cloth. Before reattaching them to the chair, make sure they are completely dry.
Page 25
Company:_____________________________________________________________________________ Address:______________________________________________________________________________ Phone:______________________________ Website:__________________________________________ Contact:_____________________________ Email:____________________________________________ Serial #:_______________________________________________________________________________ Convaid Products, LLC 2830 California Street, Torrance, CA 90503, USA Toll free in the US: 1-844-US-Mobility (844-876-6245) • Phone: (310) 618-0111 • Fax: (310) 618-8811 Email: convaidsales.us@etac.com • International Email: international.convaid.us@etac.com www.etac.us.com...
Warranty applicable in USA only, may vary in other countries. Convaid Products, LLC 2830 California Street, Torrance, CA 90503, USA Toll free in the US: 1-844-US-Mobility (844-876-6245) • Phone: (310) 618-0111 • Fax: (310) 618-8811 Email: convaidsales.us@etac.com • International Email: international.convaid.us@etac.com www.etac.us.com UG2000-ENG-Rev.00 2020-02-11 Printed in USA...
Need help?
Do you have a question about the Convaid Metro and is the answer not in the manual?
Questions and answers