Advertisement
MFJ-561K
surfaces to be connected are hot. Then, feed the solder around the lead causing
the solder to wick up, wetting all exposed surfaces.
Desoldering Tips: If you make a mistake in soldering and need to correct a
step, follow these instructions carefully. First, grasp the part to be removed with
a pair of hemostats or needle-nose pliers. Heat the solder joint until the solder
loosens and pull gently. The lead should then be able to be extracted. Repeat
this process for any other bad connections.
PARTS LIST
Your kit should contain all of the parts listed below. Please identify and
inventory each part on the checklist before you start building. If any parts are
missing or damaged, refer to the manual's warranty section for replacement
instructions.
Qty
Part Description
1
Paddle Base
1
Paddle
4
Phillips Head Screws
3
Solder Lugs (Aluminum Tabs)
2
Washers
2
Shoulder Washers
3
Kep Nuts
1
Open-end 3.5 mm Stereo Cable
1
Spacer
6
Rubber Feet
1
Wire Tie
Travel Iambic Paddle Kit
Part Number
738-0561
735-0561
654-0250S
720D-0621L
714-0631
7145-0421N
705-0440-K
620-8005
715B-0500S
770-1162
745-2149
Advertisement
