Chapter 1 Operating Instructions 6 DEGREE RAMP WELDMENT RAMP LATCH (IN LOCKED POSITION) WIRED REMOTE CONTROL LOCATION RAMP LATCH (IN UNLOCKED POSITION) ramp terms Figure 1-1: Ramp Terminology Front 6-1/2’ Ramp Assembly CAUTION 1. Remove gooseneck from trailer per instructions in Before folding or unfolding ramp(s), confirm that operator’s manual.
Page 6
OPERATING INSTRUCTIONS SUPPORT BOOM ASSEMBLY 3/4-10 x 5-1/2 HEX HEAD CAP SCREW AND HEX LOCK NUT ATTACH SLING TO THIS CROSSMEMBER FOR RAISING OR LOWERING 3/4-10 X 6 HEX HEAD CAP SCREW, PLATFORM WASHER, AND HEX LOCK 3/4-10 x 5-1/2 HEX HEAD CAP SCREW AND HEX LOCK NUT PLATFORM BRACE...
OPERATING INSTRUCTIONS SUPPORT BOOM ASSEMBLY ATTACH SLING TO THIS CROSSMEMBER FOR RAISING SUPPORT BOOM 3/4-10 X 6 HEX HEAD CAP SCREW, PLATFORM WASHER, AND HEX LOCK REAR PLATFORM BRACE FRONT PLATFORM BRACE lowered support boom Figure 1-3: Lowered Support Boom Support Boom Assembly 5.
Page 10
Equipment from Landoll Corporation is built to exacting standards ensured by ISO 9001:2008 registration at all Landoll manufacturing facilities. Model 855 Boeing Supplement Operator’s Manual Re-Order Part Number F-718-0313 LANDOLL CORPORATION 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM Copyright 2010.
Need help?
Do you have a question about the 855 and is the answer not in the manual?
Questions and answers