Test Mode - Denon DBT-1713UD Service Manual

6. Test mode

6.1. Entering the test mode
The test mode is entered by pressing the 5 and 8 buttons simultaneously, plug the AC cord into a power outlet.
When the test mode is set, the " 1 " and " 3 " indicators light.
FL tube display when test mode entered
FL Display (The display part of 13 digits)
1 2 3 4
T E
When the test mode is set, the choice screen of the mode appears on the monitor.
6.2. Selecting the mode
・ The following modes are available.
(1) Laser on/off (CD/DVD/BD) mode
(2) Error rate (skew) measurement mode
(3) Accumulated laser on time display mode
(4) Test mode cancel
q When the 9 button is pressed after entering the test mode, the display switches in the order: "T2, T7, TC, TI, T2
..."
FL Display (The display part of 13 digits)
1 2 3
T 2 L
FL Display (The display part of 13 digits)
1 2 3
T 7 E
FL Display (The display part of 13 digits)
1 2 3
T C L
FL Display (The display part of 13 digits)
1 2 3
T I T
w When the 8 button is pressed, the display switches in the opposite order from q above, starting from the current
position (for example, if currently at "TC", it switches as follows: "T7, T2 ").
5 6 7 8
S T M
:
:
:
:
4 5 6 7 8
a s e r
4 5 6 7 8
r r o r
4 5 6 7 8
a s e r
4 5 6 7 8
e s t
9 10 11 12 13
O D E
T2
T7
TC
TI
9 10 11 12 13
O n O f f
9 10 11 12 13
R a t e
9 10 11 12 13
O n T i m
9 10 11 12 13
E x i t
26