Advertisement
PREPARATIONS
Positioning
Because low-frequency sound reproduced by the powered
subwoofer is mostly non-directional, the listener will be unable
to localize the bass source. Accordingly, the powered
subwoofer provides maximum flexibility in terms of
positioning. For the most effective low-frequency sound, the
powered subwoofer should be placed on the floor close to a
En
wall or in a corner of the room.
4
Connection
There are two ways ( A and B ) to connect TS-W150
to equipment (stereo system, receiver or etc).
If the epuipment has an output jack for subwoofer,
use A Connection.
If not, use B Connection..
Note
Do not connect TS-W150 to equipment in both A and B
(Position example)
ways simultaneously.
A
A A
A Connection
A
Note
Do not plug in the AC power cords of both TS-W150 and the
epuipment to the AC power outlets before all other connections
are made.
1 Connect the SUB WOOFER or SUPER WOOFER
jack on Ethe equipment to the INPUT 1 (FROM
SUBWOOFER TERMINAL) jack on STS-W150
with C the supplied connecting cord.
2 Set the INPUT SELECT switch to "1".
3 Connect the AC power cord to an AC outlet.
Advertisement
