Speakers - HP ProBook 455 G8 Maintenance And Service Manual

Fingerprint reader cable (ZIF) (select products only) (10)
●
● RTC battery cable (11)
2. Remove the port bracket (1), by removing the three Phillips M2.0 × 4.0 screws (2) that secure the
bracket to the system board, and then removing the bracket (3).
3. Remove the two Phillips M2.0 × 2.5 screws (4) that secure the system board to the computer.
4. Lift the side of the system board upward (5), and then pull the system board away from the connectors
on the side of the computer to remove it (6).
Reverse this procedure to install the system board.

Speakers

To remove the speakers, use this procedure and illustration.
46 Chapter 5 Removal and replacement procedures for authorized service provider parts