Table of Contents
Advertisement
Dixell XR60CX Operating Manual
This manual contains: set-up instructions, unit specs, safety information,
IMPORTANT:
Your unit is preprogrammed
Place your unit in the desired location. Plug the unit in and allow it to cool and become stable for a minimum
of 24 hours before logging temperature or stocking products.
Be careful when setting or changing temperatures
WARNING: Changing some controller parameters can damage your unit and/or result in a loss of product. K2
will not be held responsible for losses due to unauthorized parameter changes.
Changing advanced parameters may damage the unit or void your warranty.
Please contact K2 before attempting to change advanced parameters.
Unfamiliar with the operation of a K2 controller?
Use the video tutorials on our website resources page or call us for assistancee with special parameters.
Some K2 units can be changed from Celsius to Fahrenhiet. We do not recommend changing your
unit to Farhenheit. Your controller has operational parameters that rely on data in Celsius to maintain
proper function.
11.16.2020
Thank you for your purchase.
controller operation and maintenance steps.
K202, K204, K210
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for K2 Scientific Dixell XR60CX
Summary of Contents for K2 Scientific Dixell XR60CX
- Page 1 Dixell XR60CX Operating Manual Thank you for your purchase. This manual contains: set-up instructions, unit specs, safety information, controller operation and maintenance steps. K202, K204, K210 IMPORTANT: Your unit is preprogrammed Place your unit in the desired location. Plug the unit in and allow it to cool and become stable for a minimum of 24 hours before logging temperature or stocking products.
- Page 2 Dixell Operating Manual CONTENTS Front Panel Commands How to Use the Hot Key Parameters Fans Alarm Signalling Defrost Default Setting Values Temperature Logging Front Panel Commands - QUICK GUIDE This key displays your target set point. When in programming mode, it confirms an opperation. This key starts a manual defrost In programming mode, this key browses parameter codes or increases display value.
- Page 3 Dixell Operating Manual Parameters - How to change a parameter value 1. Enter the programming mode by pressing keys for 3s. (°C or °F LED starts blinking) 2. Use the up and down keys to select the required parameter. Press the SET key to display its value. 3.
- Page 4 Dixell Operating Manual Alarm Signaling Code Alarm Recovery Probe alarms “P1” and “P2” start some seconds after the fault in the related probe; they automatically stop some seconds after the probe restarts normal operation. Check connections before replacing the probe. Temperature alarms “HA” and “LA” automatically stop as soon as the temperature returns to normal values.
- Page 5 Service K2 Scientific want to make sure you are happy with your purchase. There are several ways for you to contact us with questions or service needs. Be sure to include your four digit order number or at least your model number handy to speed up the process.
Need help?
Do you have a question about the Dixell XR60CX and is the answer not in the manual?
Questions and answers