Advertisement
Using the Microphone input
Playing Music from a USB Memory Stick
1. Insert a USB Memory Stick (pre-loaded with audio tracks – Mp3, WAV, files etc.) into
the USB memory stick player (6) on the top panel. NB the USB port supports USB 2.0
and up to 32GB capacity max.
2. The tracks on the memory stick will begin to play automatically.
3. Press the Play/Pause button
Play/Pause button
4. Briefly press the skip forwards
track being played, press and hold to search a track.
5. Rotate the Volume Control (12) control (right) clockwise and anticlockwise to increase
and decrease the volume level.
NB the speaker will default to Aux mode after the USB memory stick has been removed.
Playing Music from a Micro SD/TF Card
1. Insert a Micro SD/TF card (pre-loaded with audio tracks – Mp3, WAV, files etc.) into
the Micro SD/TF Card Player (4) on the rear panel. NB the Micro SD/TF card player
supports cards up to 32GB capacity max.
2. The tracks on the card will begin to play automatically.
3. Briefly press the skip forwards
track being played, press and hold to search a track.
4. Rotate the Volume Control (12) control (right) clockwise and anticlockwise to
increase and decrease the volume level.
NB the speaker will default to Aux mode after the Micro SD/TF card has been removed.
TWS (True Wireless Stereo) mode
TWS mode enables two speakers to be used together producing stereo sound whilst using
them in Bluetooth mode, follow the below steps to pair the two speakers together using
Bluetooth:
1. Press and hold the Play/Pause (TWS) button (11)
and the two speakers will automatically pair together.
2. Connect to the speakers via Bluetooth as described in 'Using Bluetooth Mode' above.
3. Enable the music player on your Phone, Tablet or other device you are using.
4. Briefly press the Play/Pause button (11)
connected device playing.
NB True Wireless Stereo pairing is only available in Bluetooth mode.
Care and Use of your Speaker
• Always disconnect the Speaker from the USB supply before cleaning.
• Clean outside of the Speaker with a clean damp cloth. Never clean with harsh or abrasive
cleaners.
• Do not submerge the Speaker or its charging cable in water or any other liquids.
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Insert a Microphone (not supplied) equipped with a 0.25"
(6.35mm) Jack plug into the Microphone Input Jack Socket
(8) in order to sing along with your favourite tracks.
(11) to play and pause the memory stick. Press the
(11) again to resume playing the memory stick.
(10) and skip back
(10) and skip back
buttons (9) to change the
buttons (9) to change the
on both speakers for three seconds
on either speaker to start and stop (pause) the
LED Bluetooth Party Speaker
AVS1449
User Manual
7
Advertisement
