Shortening A Metal Link Bracelet - Yves Camani YC1060 Manual

EN

Shortening a metal link bracelet

Please have your metal bracelet shortened by a specialist. Improper adjust-
ment of the bracelet may lead to your guarantee becoming void.
Bracelets with pins:
In order to shorten the bracelet, push out the pins on the side of the bracelet
using a needle or very small screwdriver. Please observe the arrows engra-
ved on the reverse of the metal bracelet or on the labels. After the bracelet
has been shortened (links removed) simply push the pins back into place.
PAGE 18