Download Print this page

Sharp XG-PH50X Quick Start Reference Sheet page 3

Hide thumbs Also See for XG-PH50X:

Advertisement

SmartPanel Projector Driver Application Note
The hidden functions available for the Sharp with this Driver are as follows:
MENU
ADJUST LEFT
ADJUST RIGHT
ADJUST UP
ADJUST DOWN
ENTER
UNDO
D. Relays
The following table specifies the factory preset
settings for the low-current relays found on the rear
of the SmartPanel. The Configuration Utility can
be used to customize these settings your installation.
Relay 1
ON Maintained
Relay 2
ON Momentary
Relay 3
OFF Momentary
Selection
Momentary; not Binary
E. Other Presets
The following table specifies other default factory settings for this Driver that affect is control of the
Projector.
Power Status Feedback Method
Control Wiring Option
Control for the Sharp with this Driver is via RS-232 and Wired Remote. An IR Emitter can alternately be
used.
NOTE: When Wired Remote is connected to the Sharp projector, the Sharp will not respond to its remote
control.
The following table specifies settings for the Panel's configurable timers. For more information on the
inactivity shutdown feature and the lockout timer see the SmartPanel Configuration and Installation
Guide.
Lockout Timer
Inactivity Shutdown
© 2005 SP Controls Inc. 601 Minnesota Suite 115 San Francisco, CA 94107
BLACK SCREEN
LENS SELECT
AUTO SYNC
ZOOM UP
ZOOM DOWN
FOCUS UP
FOCUS DOWN
RS-232 Power Polling (see note 1)
Wired Remote or IR Emitter (see note 2)
66 seconds (see note 3)
Disabled
ENLARGE UP
ENLARGE DOWN
KEYSTONE
RESIZE
FREEZE
MUTE
RELAYS
PWR
PWR
PWR
ON
ON
OFF
MAINT.
MOM.
MOM.
help@spcontrols.com
Sharp XG-PH50X
500mA MAX. CURRENT
SELECTION
(EXT. SWITCHER CTRL)
4
3
2
1

Advertisement

loading