WilTec 62553 Operation Manual page 3

Battery tester for 6v and 12v batteries
Table of Contents

Advertisement

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Note!
In order to ensure perfect condition and safe operation, the user must observe and comply with the
safety and warning instructions in these instructions.
Intended use
The intended use of the device is to test 6V and 12V batteries and accumulators. Any other use than
specified is not permitted!
Operating conditions/Safety instructions
The device may only be operated at the voltage specified for it.
The operating position of the unit is horizontal and lying on the rubber feet so that the display
points upwards.
It is essential to ensure that the technical specifications given in this manual are observed. Ex-
ceeding the specified values may cause damage to the unit or the object to be tested.
The unit must not be placed in the vicinity of strong HF or magnetic fields, as this may cause
the unit to enter an undefined operating state, resulting in incorrect test results.
Ventilation slits or vents prevent an excessive rise in temperature. Keep materials such as
flammable substances or paper away from the unit.
Do not install the unit in a place where it is exposed to high humidity or vibrations.
The device is intended for use in dry and clean rooms.
If condensation forms, wait up to 2 hours for the unit to acclimatise.
Protect the unit from moisture, splashes of water and the effects of heat.
The unit must not be used in conjunction with highly flammable and combustible liquids.
This device may only be used by persons with limited physical, sensory or mental abilities or a
lack of experience or necessary expertise if they have been introduced to the use of the de-
vice by a competent person familiar with the device and responsible for them, and if they are
supervised by this person.
Children must not use the appliance and must be supervised in its vicinity to ensure that they
do not play with the appliance.
Do not operate the assembly in an environment where flammable gases, vapours or dust are
present.
Repairs may only be carried out by a trained electrician. Only original spare parts may be
used for repairs. The use of different spare parts can lead to serious damage to property and
personal injury.
The unit must always be disconnected from the test object before use.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Artikel 62553
Seite 3
11 2020-1

Advertisement

Table of Contents
loading

Table of Contents