Table of Contents
Advertisement
Quick Links
1
Introduction
Teledyne LeCroy's PCIe External Cable 3.0 to x16 PCIe Slot Adapter provides developers with multiple test capabilities to
speed development of new PCIe External Cable 3.0 designs. It supports data rates of 2.5 GT/s, 5.0 GT/s and 8.0 GT/s.
Several test points and headers provide easy access to check status of bus signals.
The PCIe External Cable 3.0 to x16 PCIe Slot Adapter card works with the PCIe External Cable 3.0 class cable (or set of
cables) up to 0.5 meter in length as defined in the PCI Express
External Cable 3.0 is a new PCIe cable based on the current Mini-SAS HD cable design.
2
Components
The adapter package includes the following components:
•
PCIe External Cable 3.0 to PCIe Slot Adapter
•
Differential Clock cable
•
User Manual and Quick Start Guide (this document)
Inspect the received shipping container for any damage. Unpack the container and account for each of the system
components listed on the accompanying packing list. Visually inspect each component for absence of damage.
In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper's inspection.
®
PCIe
External Cable 3.0 to PCIe Slot Adapter
User Manual and Quick Start Guide
Before Starting
Use this document for quick installation and setup. If you experience problems or need
more information, contact Teledyne LeCroy customer support or check the Teledyne
LeCroy web site
https://teledynelecroy.com/sw/pciexpress
®
PCIe External Cable 3.0 to PCIe Slot Adapter
External Cabling Specification Revision 3.0. The PCIe
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Teledyne Lecroy PCIe External Cable 3.0 to PCIe Slot Adapter
Summary of Contents for Teledyne Lecroy PCIe External Cable 3.0 to PCIe Slot Adapter
- Page 1 Introduction Teledyne LeCroy’s PCIe External Cable 3.0 to x16 PCIe Slot Adapter provides developers with multiple test capabilities to speed development of new PCIe External Cable 3.0 designs. It supports data rates of 2.5 GT/s, 5.0 GT/s and 8.0 GT/s.
- Page 2 Access to I C Bus The I C bus is connected from the PCIe Bus card slot to the PCIe External Cable 3.0 to PCIe Slot Adapter connector J22: Port 0 and J16. J16 provides access to I C/SMBus signals from the PCIe slot for other I C analysis equipment.
- Page 3 Switch Configuration: SW1 Table 1: PCIe Link Width Configurations SW1-1 SW1-2 SW1-3 SW1-4 PCIe Bus Link Width x4 (default setting) Note 1: This switch sets the PRNST# bus pins so the card can be appropriately identified by the root complex. Note 2: Other switch configurations not valid.
- Page 4 Test Points Table 5: PCIe External Cable 3.0 to PCIe Slot Adapter Test Points and Functions Test Point Number Function TP24 DGND TP53 P2_CBLPRSNT# TP55 P3_CINT# TP57 P3_CADDR TP28 P3_CMICLK TP29 P3_CMIDAT TP26 P2_CMIDAT TP27 P2_CMICLK TP54 P2_CADDR TP25 DGND...
Need help?
Do you have a question about the PCIe External Cable 3.0 to PCIe Slot Adapter and is the answer not in the manual?
Questions and answers