3
Internal Electrical Connections of the Battery
18
2
•
Connect cables in accordance with local installation laws and regulations.
Before connecting cables, ensure that the DC switch on the battery and all the switches
•
connected to the battery are set to OFF. Otherwise, the high voltage of the battery may
result in electric shocks.
Installing an Internal Ground
3.1
Cable
•
Internal electrical cables are delivered with the battery, see the
case.
The Amphenol terminal is used as the DC terminal between the power control module and
•
the battery expansion modules.
Connect the ground
points of modules in
sequence, and secure
the ground cable using
a ground screw.
Installing Internal DC
3.2
Terminals
Packing List
9
click
Insert the positive and
negative connectors
into the positive and
negative battery
cascading terminals
(B+ and B–).
in the packing