Tape Playback - Aiwa CT-FX530M Operating Instructions Manual

TAPE PLAYBACK

1
Insert a cassette to start playback.
If a cassette is already inserted, press FUNC
repeatedly to select Tape Play mode to start
playback.
Playback starts in the direction that the unit
played back previously.
2
Adjust the volume with the Jog Dial.
Press the following buttons to operate tape
transport.
To do this
Eject the cassette*
Change the playback side
Stop fast-forwarding or
rewinding and resume
playback
Fast-forward either side of
the tape
To resume playback, press
the same button again
Rewind either side of the
tape
To resume playback, press
the same button again
* When you eject the cassette, the unit switches to the
previous mode.
Auto Reverse function
When the end of the tape is reached during
playback or fast tape transport, the direction of
the tape is automatically reversed, and playback
starts on the other side.
Direction indications
Tape transport display
When you start tape playback, the transport
display indicates the tape movement.
Upper side: During playback
Lower side: During playback
During fast-forwarding or rewinding, the transport
display changes rapidly.
Before turning the ignition off
Be sure to eject any cassette from the unit.
Switching modes
When the unit is in a mode other than Tape Play
mode, inserting a cassette switches the unit to
Tape Play mode automatically.
To prevent tape problems
Before inserting a cassette into the unit, make
sure that there is no slack in the tape. If necessary,
take up the slack by inserting a pencil through the
Press this button
spindle hole and winding.
Tapes of 90 minutes or longer are extremely thin
and easily deformed or damaged. They are not
recommended.
Displayed when the upper side of the
cassette is being played.
Displayed when the lower side of the
cassette is being played.
ENGLISH
10
tousi-E-11