1.5.2 Waterproof box EZU-WB1 (Option)
1)
Waterproof box EZU-WB1 ············· 1 piece
2)
Airtight tester ···················· 1 piece
3)
Instruction Manual ················· 1 copy
This accessory is necessary for protecting the probe connector
against liquid when the probe is disinfected by
washer-disinfector. About how to connect this accessory to the
probe connector, refer to the instruction manual of Waterproof
box EZU-WB1
1.6
External View
The external view of the EUP-B512 is shown in Fig.1.
Cable
Immersible part:
Un-immersible part: This part should not be immersed in disinfectant
Fig.1 External view of the EUP-B512
Immersible part (IPX7)
Magnetic sensor attachment
Connector
This part can be immersed in disinfectant solution and
also can be cleaned by water.
solution and also can not be cleaned by water.
- 3 -
Applied part
Spacer for EZU-RV2S
Head
Q1E-EP0780