Special Safety References - Ubert HT Series User Manual

6

2.5 Special safety references

2.5.1 Safety devices

Before operating the unit all protective devices as well as all removable parts must
be installed correctly and be fully workable.

Protective devices may only be removed:
 after stand still and
 prevention of unintentional restart.
 If partial components are delivered, an authorized staff member or service tech-
nician has to execute assembly according to installation guidelines.
2.5.2 Informal safety steps

The operating manual is to be kept constantly accessible in the operating area.

In addition to the operating manual all generally acknowledged and all local regula-
tions for accident avoiding and environmental protection have to be applied with.

All safety- danger labels at the unit are to be kept in readable condition.
2.5.3 Education of the personal

Only trained and instructed personal may work at the unit.

The responsibilities of the personal are to be determined clearly for installing, start-
up, operation, assembling, and servicing of the unit.

During instruction the personal may only work at the unit under supervision of an
experienced person.
2.5.4 Unit-control

Only instructed personal is allowed to operate the controls.
2.5.5 Safety during regular operation

The unit is only to operate if all protective devices are fully workable.

At least once per shift the unit is to be examined with regard to visible damages and
functional ability of the safety devices.
2.5.6 Dangers caused by electric energy

Any work on the electrical supply is to be executed only by a specialist.

Likewise the electrical connection of this unit to the power supply must be executed
by an electro-specialist; the connection must follow the rules of the local determina-
tions.

The electric installation is to be examined regularely. Loose connections and brased
cabels are to be eliminated immediately.

If works at any life-parts are necessary, a second person who switches off the main
switch if neccessary is to consult.
2.5.7 Special danger-spots

Before starting cleaning make sure that all parts of the unit have cooled down.

Do not touch the hot water in the water drawer!
printed: 02/2015 Subject to change!
Important References
 TopLineUserManualHT.docx