Advertisement
Quick Links
Advertisement
Related Manuals for InCarTec r.LiNK-Interface 27-316
Summary of Contents for InCarTec r.LiNK-Interface 27-316
- Page 1 Website: www.incartec.co.uk E-Mail: sales@incartec.co.uk r.LiNK-Interface 27-316 RL-CCC-PNP Interface for activation of factory rear-view camera input compatible with BMW vehicles with Professional CCC navigation systems and factory PDC behind Full version with Quadlock plug and play harness.
-
Page 2: Table Of Contents
Contents 1. Prior to installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 2. Installation 2.1. Assignment of the female 12pin connector of harness RLC-CX011 2.2. Assignment of the harness PNP-QUAD01 2.3. Connection of the RLC-CX011 and PNP-QUAD01 harness 2.4. -
Page 3: Prior To Installation
1. Prior to installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. 1.1. Delivery contents Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes. -
Page 4: Installation
2. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. -
Page 5: Camera Video Connection
2.4. Camera video connection Pin-assignment quadlock connector / CAB-TVAS40 Assignment Pin number ● Red (Video signal) Pin 4 (Chamber A) ● Black (Video ground) Pin 2 (Chamber A) No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. -
Page 6: Specification
4. Specifications Operation voltage 10.5 – 14.8V Stand-by power drain <1mA Operation power drain ~50mA Power consumption 0.07-40W Temperature range -30°C till +80°C Weight Measurements (box only) W x H x D 71 x 22 x 50...