Page 1
COMPACT DISC PLAYER REPRODUCTOR DE DISCOS COMPACTOS LECTEUR DE DISQUES COMPACTS XC-30M For assistance and information 87-AMB-903-01 980220AYW-P-9 OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES call toll free 1-800-BUY-AIWA (United States and Puerto Rico) MODE D’EMPLOI (English) (Español) (Français)
ENGLISH WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN “CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
For your convenience, record the model number and serial number (you will find them on the rear of your set) in the space provided below. Please refer to them when you contact your Aiwa dealer in case of difficulty. Model No.
BEFORE OPERATION To turn on the unit After connecting the AC cord of the connected amplifier, press the POWER button on the amplifier and on the CD player. The display window lights up. After use Press the POWER button to turn off the power. 6 is displayed dimly on the display window.
CD PLAYING BASIC OPERATIONS LOADING DISCS z z OPEN/CLOSE button to open the disc Press the z compartment. Load disc(s) with the label side up. To load one or two discs, place the disc(s) on the tray(s) in the direction of the arrows as illustrated. Tray number To load three to five discs, press the DISC CHANGE button to...
Otherwise, the disc may be damaged or the disc compartment will not open. If it does not open, please consult your Aiwa dealer for repair. • Do not place more than one compact disc on the disc tray.
To cancel repeat play Press the REPEAT button so that “ out. • During random play, mode cannot be selected to repeat only the current track. • If the REPEAT button is pressed while the auto power off is in operation, the auto power off is canceled.
RECORDING AI EDIT RECORDING The AI EDIT function lets you record tracks from one disc without worrying about tape lengths and track lengths. When you insert a CD, the unit automatically calculates track lengths. If necessary, it rearranges the order of tracks, so that no track is cut short. Use the remote control.
PROGRAMMED EDIT RECORDING This function lets you program tracks to be recorded from all of the discs, in any order. The remaining time on each side of the tape is displayed as you program the tracks. Use the remote control. 1 Prepare for recording.
GENERAL CARE AND MAINTENANCE Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. To clean the cabinet Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner. Care of discs •...
PARTS INDEX Instructions about each part on the unit or remote control are indicated on the pages listed below. Main unit Parts DELETE DISC CHANGE DISC DIRECT PLAY DISPLAY z OPEN/CLOSE PHONES caPLAY/PAUSE POWER PRGM/CHECK RANDOM REPEAT SLEEP sSTOP/CLEAR 0-9, +10 Remote control Parts AI EDIT...
Page 12
For assistance and information call toll free 1-800-BUY-AIWA (United States and Puerto Rico) Printed in Malaysia...