Advertisement
EN : Instruction Manual
Clock Digital Timer (54031)
A. Functions :
The Easy Setting Clock Digital Timer (hereinafter refer as "Timer") can
preset speci c on/o
time of your electrical appliances. Setting
programs for a digital timer has never been so easy. It is ideal for energy
saving and home security purposes. The big round LCD shows program
setting status and large digital clock display.
B. LCD Diagram & Description
2
1
3
1. Pointing Arrow
2. Highlighted section shows timer on, each section 30 minutes
3. Non-highlight sections shows timer o
Buttons
Functions
• In clock display, press and hold to enter CLOCK
setting mode
• During clock or program setting mode, press to
adjust
• In clock display, press and hold to enter PROGRAM
setting mode
• During clock or program setting mode, press to
adjust
• Press to con rm the clock setting / timer program
setting
• In clock mode, press to switch from ON/OFF/AUTO
mode
• Press and hold 5 seconds, all programs will be
erase.
R
Press to reset the timer
C. Clock Setting
1. In clock mode, press and hold
to enter CLOCK setting mode. The
number of hour ashes.
2. Press
or
to adjust the hour.
3. Press
to con rm, then number of minutes ashes
4. Press
or
to adjust the minute.
5. Press
to con rm. Current time is set, LCD returns to clock display
mode.
D. Program Setting
1. In clock display mode, press and hold
to entre PROGRAM setting
mode. Pointing arrow ashes.
2. Press
or
to move the pointing arrow to the timer on time, each
section represents 30 minutes
3. Press
to con rm, the pointing section shaded black, shows timer
turns on time
4. Press
again, the pointing section resume un-shaded, means timer
turns o time
5. Press and hold
or
, it will highlight all the sections pointing
arrows moves
6. Press
to con rm, the pointing section highlighted, showing all the
timer turns on time
Without pressing any buttons for 10 seconds, timer will save the setting
program and LCD return to clock display mode.
7. Press R to reset the timer. Clock display
Notes:
• Press R to reset the timer. LCD shows 0:00 ； AUTO, all program and
clock setting to be reset all over again.
• In clock display mode, press
to adjust switch the timer from
AUTO/ON/OFF mode:
- Auto: timer turns on/o appliance according to setting program
- ON: timer always on
- OFF: timer always o
E. Connections
1. Preset your desired On/o programs on the Timer as mentioned
above.
2. Switch o your electrical appliance
3. Connect your appliance's to the Timer's socket, then connect the
Timer to the AC socket to get power
4. Switch on your appliance.
5. Appliance will then be turned on/o according to your program
setting
F. Cautions
- Battery will be fully charged after connecting to the main power for 4
hours
- Risk of electric shock:
- Keep away from children
- Unplug timer before cleaning and program setting
- Fully insert plug
- Do not use in wet locations, the timer is for indoor use only
- Risk of re:
- Do not use to control appliances that contain heating
elements (cooking appliances, heaters, irons, etc.)
- Do not exceed the speci ed electrical rating
G. Speci cations
1. Power Rating :230V~, 50Hz, 8A,
2. Resistive load : 1800W max.
3. Timer setting interval: 30 minutes
WEEE & ROHS
Within the European Union, this symbol indicates that the products
must not be disposed in the household waste. Devices contain valuable
recyclable materials that should be recycled for reuse and uncontrolled
waste disposal may cause harm to the environment and human health.
Please dispose the old products via suitable collection systems or send
the unit to the o ce where you bought it. This will make the product
recycling.
Discarding batteries is an environmentally conscious manner and
should be in accordance with applicable regulations.
1) Please insert the batteries correctly according to the polarity (+ and -)
connected to the Battery and the device being characterized.
2) Fully discharge the battery by operating this apparatus to a standstill.
3) Remove the battery from the device.
3) Dispose the batteries at an o cial collection point for chemical
waste.
Made in PRC
Chacon S.A. • Avenue Mercator 2 • 1300 Wavre • Belgium
www.chacon.com
V1.1.
Lot n°: xx/2020
Advertisement
