Siro SIS1605 Manual

Bidirectional 5-channel radio-handheld transmitter with integrated timer

Advertisement

Bidirectional 5-Channel Radio-Handheld Transmitter
with integrated timer
SIS1605
Compatible with bidirectional SIRO drives:
 ERBS15-LE
 ERBS25-LE
 EYAS25-LE
06-2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SIS1605 and is the answer not in the manual?

Questions and answers

Summary of Contents for Siro SIS1605

  • Page 1 Bidirectional 5-Channel Radio-Handheld Transmitter with integrated timer SIS1605 Compatible with bidirectional SIRO drives:  ERBS15-LE  ERBS25-LE  EYAS25-LE 06-2020...
  • Page 2 1. Functional overview The remote control SIS1605 is a radio transmitter with integrated timer. You can use the transmitter to remotely control drives and radio receivers of the bidirectional LE-series from SIRO either manually or automatically with a program. The SIS1605 remote controller has 5 radio channels with which the motors or radio receivers can be controlled individually or combined into several groups.
  • Page 3 2. Installation The remote controller SIS1605 requires a battery cell type CR2450 – 3V as power source. To ensure that the device can execute all commands, it is recommended to replace empty batteries in time. 1. Open the battery compartment of the remote controller on the back by sliding the cover down.
  • Page 4 Before the SIS1605 remote controller can control one or more drives, the connection between the devices must be established. First select a channel on the SIS1605 remote controller that is to be used to control one or a group of drives. Make sure that the remote controller is in manual mode.
  • Page 5 7. Press P1 + button to confirm 8. Press the up or down button 9. Briefly press the P1 + button. the minutes of the roll up time. to set the hours (roll down). The minute display (roll down) The hour display of the roll up flashes.
  • Page 6 Any defects occurring within the warranty period will be remedied by SIRO free of charge by supplying an equivalent or new product. Replacement delivery for warranty reasons does not result in general extensions of the original warranty period.

Table of Contents