Related Manuals for Siro ERBS15LE Series
Summary of Contents for Siro ERBS15LE Series
- Page 1 Battery Motor – Radio Drive ERBS15LE - Series Compatible with: Control Station SI7002 Remote Controller SIS1600, SIS1602, SIS1605 Solar Panel SI1288H Sun Sensor SIS1187 05-2020...
-
Page 2: General Safety Guidelines
1. General safety guidelines Notes on the product Check the drive for intactness. Do not use the product if you discover any damage. In this case, contact the point of sale. Only use the drive to open and close suitable hangings. ... - Page 3 3. Programming of the remote control (radio) transmitters 3.1 Check the connection between the engine and transmitter 1. Test the connection between the handheld transmitter (remote controller) and the motor by pressing the up or down button to move the drive up or down. If the connection exists, please go directly to point 3.3.
- Page 4 3.3 Check and change the direction of rotation of the drive Important: Please ensure the direction of rotation before starting to input the motor. We are not liable for product damage caused by negligence during installation. If the direction of rotation is reversed, there are two ways to change this 1.
-
Page 5: Installation Of The Motor
4. Installation of the motor Do not hit the motor with hard object – not even to push it into the roller blind’s tube. This can cause damage to the drive and the shaft. Avoid installing the motor in damp places or places where it encounters water. Installation ... -
Page 6: Setting The End Positions
5. Setting the end positions You need to define the upper and lower end positions, when reaching these, the drive switches off automatically. To do this, the drive system must be fully inserted. You can choose whether to set the lower or upper end position first. ... -
Page 7: Reset To Factory Settings
6. Setting a desired middle position (optional) You can set a middle position of your choice as an option. The middle position can only be set after the two end positions have been set. Setting the desired middle position: 1. -
Page 8: Technical Data
The warranty covers all design faults, material defects and manufacturing faults. Any defects occurring within the warranty period will be remedied by SIRO free of charge by supplying an equivalent or new product. Replacement delivery for warranty reasons does not result in general extensions of the original warranty period.
Need help?
Do you have a question about the ERBS15LE Series and is the answer not in the manual?
Questions and answers