Page 1
FLORENZ ELECTRIC HEATING UNIT Item no. 4923830 INSTRUCTIONS FOR USE www.enders-germany.com...
Page 2
Read and observe these instructions before and during use. Only use the product as described in these instructions, to prevent accidental injury or damage. Keep these instructions for future reference. If the item is given to someone else, please include these instructions. We hope you enjoy using your Enders product.
Page 3
FLORENZ Item no. 4923830 WARNINGS/SAFETY INSTRUCTIONS Please read these instructions carefully before using your new heating unit Make sure the heater component is free of all packaging material. Place the heating unit on an even surface. The heating unit becomes hot during use. Do not touch the...
Page 4
The heater must not be used directly beneath a plug socket. En sure that the device has completely cooled down before storing it. Children must not be allowed to play with the device. If the power cord of this device is damaged, it must be re placed by the manufacturer, their service department or a The device is not intended for use by persons (including chil dren) with reduced physical, sensory or mental capabilities...
Page 5
FLORENZ Item no. 4923830 OPERATION Connect the power cable with a 220-230 V, 10 A socket in a secure and dry location. The dial is used to switch on/off and control the settings of the device. (0) for OFF, (1) for 450 watts, (2) for 900 watts.
Page 6
MAINTENANCE/STORAGE/CARE Once the heater has cooled down and has been disconnected from the power supply, the outer casing of the heating unit may be wiped down with a dry cloth. Never use corrosive or solvent products to do so. Any maintenance work, e.g. replacing the carbon rods, etc., should only be carried out Store the heater in a dry room.
Page 7
If, despite our quality checks, your product should be defective, please do not bring it back to the retailer but contact Enders directly. By doing so, we can ensure a quick processing of your complaint. Use the service form on our website for this purpose.
Need help?
Do you have a question about the FLORENZ and is the answer not in the manual?
Questions and answers