IMPORTANT SAFEGUARDS When using the electrical appliance, the below basic safety preCAUTIONs should be followed: 1. Read all instructions. 2. Before using check that the voltage power corresponds to the one shown on the appliance nameplate. 3. Do not let cord hang over edge of table or counter. 4.
Page 3
19. Never put non-food items into the jug to blend. 20. Do not open the lid before the blade stops running completely to avoid hazard. 21. Do not put hands or other objects into jug during working. 22. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
KNOW YOUR BLENDER 700mL Jar base Jar cover asm Motor unit Jar 700mL ASSEMBLY REMOVAL Press Fig.1 Fig.2 Fig.3 Fig.4 Fig.5...
Page 5
IMPORTAN: Place the motor base on a clean,dry,level surface such as a counter or table top. 1.Insert the plug into the power supply socket. 2.Pack the food material into the cup; NOTE:Do not overfill!To avoid spilling,do not add ingredients past the“MAX”fill line.
Start/Stop Press once to start continuous running,press again to stop. Automatic stop after 60 seconds. Auto Blend Pulse and blends fresh or softer ingredients to consistent results,timer counts down. Stop the each time, can observe whether the agitation result attain the request or not.
3. Connect the appliance with power source, Press“Start/Stop” press key; 4.Need to work for more than 30 secondes. NOTE: The max operation time per time shall not exceed 1 minutes and minimum 10 minutes rest time must be maintained between two consecutive cycles. And the appliance must rest for at least 10 minutes every 10 cycles.
-Dry all parts and then reassemble them again. But store the appliance with the jug lid not be closed completely to allow air to circulate and prevent jug odors. -If any problem has been encountered during use, never disassemble the Motor Unit by yourself, there are no user serviceable parts inside.