Airlink101 AWLC3026T Quick Installation Manual

802.11g cardbus adapter

Hide thumbs Also See for AWLC3026T:

Install Utility and Driver

This Quick Installation Guide only provides the basic instructions. For more

advanced features, please refer to the User's Manual in the provided CD.

Note: Do not insert the Cardbus Adapter until you have reached the appointed

step.

For Windows 98SE and ME users, you may be prompted to insert the Windows

98SE or ME CD during the driver installation. Be sure to have your Windows 98SE

or ME CD ready.

Ver. 1A

Package Content:

•

Cardbus Adapter

•

Driver & Utility CD

•

Quick Installation Guide

Step 1

Insert the Driver & Utility CD into your CD drive and select Install Utility

and Driver from the menu.

Note: If the Autorun screen doesn't appear automatically go to Start, Run, and

type D:\autorun.exe (where D is the letter of your CD drive) and click OK.

Step 2

Click Next at the welcome screen.

Step 3

Click Next to accept the default destination folder.

Table of Contents

Do you have a question about the AWLC3026T and is the answer not in the manual?

Page 1: Quick Installation Guide
Quick Installation Guide 802.11g CardBus Adapter Model # AWLC3026T Section 1 Install Utility and Driver This Quick Installation Guide only provides the basic instructions. For more advanced features, please refer to the User’s Manual in the provided CD. Note: Do not insert the Cardbus Adapter until you have reached the appointed step.
Page 2 Step 4 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signature Not Found prompt). Step 5 Verify Yes, I want to restart my computer now is selected and click Finish to restart your computer. Step 6 After your computer is restarted, insert the Cardbus Adapter.
Page 3: Configure The Cardbus Adapter
Section 3 Section 2 Configure the Cardbus Adapter To open the Cardbus Adapter’s utility go to Start > (All) Programs > Airlink101 802.11g CardBus Utility > Airlink101 802.11g CardBus Utility. Step 1 Go to the AP List tab, select the SSID (Network Name) of the wireless network you wish to connect to, and click Connect.
Page 4: Technical Support
Step 4 Select the proper encryption setting for your wireless router or access point from the drop-down menu and click Next. Step 5 Follow the on-screen instructions to complete the encryption settings. Click Complete when finished. Step 6 You should see a blue circle around the antenna icon indicating a valid connection.