Elite MicroVario User Manual

Esprit Tech
P.O. Box 360815
Melbourne, FL
32936, USA
MicroVario is a sensitive altimeter/variometer which uses the latest MEMS technology to achieve a high level of
accuracy, while preserving miniature dimensions. The sensor is able to detect tiny changes in atmospheric
pressure to indicate the climb/sink rate.
F
EATURES
- Small dimensions. The sensor is connected directly to the receiver telemetry port.
- Accurate measurement of absolute/relative altitude and climb/sink rate.
- Automatic telemetry detection: Duplex EX, Hott, MSB, S.Bus2.
- Configurable alarms on altitude and climb rate.
- Configuration through the transmitter.
- Firmware updates.
Dimensions
Weight
Pressure range
Altitude resolution
Typical variometer noise ratio
Operating current
Operating temperature
Supply Voltage
Telemetry
Status LED
I
NSTALLATION
Connect the MicroVario directly to the receiver telemetry port. Please note that the sensor is very sensitive to
changes in atmospheric pressure and also to mechanical stress. To reach the most accurate altitude
measurements please pay attention to the receiver placement. Try to avoid any mechanical stress on the
sensor. The MicroVario should not be directly exposed to the airflow and any close contact with components
producing heat (such as engines or speed controllers) should be avoided.
U M
SER ANUAL
MICRO VARIO
21,5x10x4mm
300÷1200hPa
Duplex EX, Multiplex MSB, Graupner Hott, Futaba S.Bus2
1
Support@EspritTech.com
https://www.espritTech.com
2g
0.1m
± 0.05m/s
15mA
-20 – 85°C
3.5 – 12V
YES
(1) 321.729.4287