Acuva SOLARIX User Manual page 9

PRODUCT USAGE
Disinfection
SolariX USer'S ManUal
#5 Disinfect the target surface. Take note of the
safety considerations indicated on page 5.
When finished disinfecting, turn OFF the device,
fold the device and slide the safety switch to OFF
position (slide switch to the left).
#6 When the device is low on battery, the indicator
LED will blink blue while in use, and blink orange
while the UVLEDs are OFF.
#7 To charge the device, simply insert a USB C
plug connected to your phone charger or laptop
with a cable. For safety reasons, the device cannot
be used during charging.
#8 When the device is being charged, the indicator
panel beside the USB-C port will be flashing green.
When charging is finished, this panel will be lit solid
green.
While performing disinfection of a surface, keep the
device at a 5cm distance and slowly move it (10cm/
second) over the target surface 10 times back and
forth. For an area of 50cmx50cm, the user needs
to uniformly scan the surface for about a minute to
achieve disinfection.
Please view instructional video by scanning the QR code on page 3.
ENGLISH
9