Related Manuals for Tusa RS-606
Summary of Contents for Tusa RS-606
- Page 1 TUSA REGULATORS OWNER’S MANUAL BEFORE USING ANY TUSA REGULATOR, READ THIS MANUAL COMPLETELY. 13th.
- Page 2 We at TUSA want you to have many years of dependable service from your new equipment and have many memorable and safe dives.
- Page 3 Repair, servicing, or addition of accessories (e.g. pressure gauge) to this regulator is to be performed ONLY by a qualified TUSA Service Facility. The HP and LP outlets of the first stage have intentionally been fitted with different threads to prevent the possibility of incorrect fitting of accessories.
- Page 4 R1100 First stage The TUSA R1100 offers a first stage with the balanced diaphragm design. This design features minimum variation in intermediate pressure in response to changes in residual cylinder pressure and depth. The ports are in left-right symmetry (H.P. × 2, L.P. × 4) for easier attachment to tanks, even for beginners.
- Page 5 12. When the second stage is not in your mouth, uncontrolled air delivery can take place. This can be stopped by turning the second stage upside down and allowing it to fill with water. Should the air delivery continue, abort the dive and have the regulator inspected by a TUSA Authorized Service Center.
- Page 6 Providing the best possible preventative and routine maintenance before, after, and between dives will help to ensure the maximum life of your TUSA Regulator. To achieve this goal, there are a number of simple, yet important, routine maintenance procedures that should be followed by the diver after each use of the equipment.
- Page 7 4. Do not disassemble your regulator. There are no adjustments which can or need to be carried out by the user. Take the regulator to a qualified TUSA dealer or service facility for service. Ensure that only original parts are used to service your regulator.
- Page 8 The Enriched Air Nitrox (EAN) Policy TUSA regulators are built with a high level of care using quality components and lubricants. The following TUSA regulators in Standard condition have passed required testing for Enriched Air Nitrox (EAN) use by the ASTM (American Society for Testing and Materials) G-175 test protocols.
Need help?
Do you have a question about the RS-606 and is the answer not in the manual?
Questions and answers