Monitor System - Fuso Multi Use Tester III Instruction Manual

Operating Procedures for the OBD-II Test Mode menu
7-5-5. Vehicle Information(Mode$09)
(1) Select the desired VIN to be displayed.
(2) Selected VIN is displayed.
7-5-6. Readiness Tests

7-5-7. Monitor System

→ go to section (2).
Readiness Test results are displayed.
• Not Available : Monitor not supported.
• Complete : Monitor complete.
• Incomplete : Monitor not complete.
The corresponding state of Monitor System is displayed.
• Available : Monitor supported.
• Not Available : Monitor not supported.
78