Operating Procedures For V.c.i. Stand-Alone Diagnosis - Fuso Multi Use Tester III Instruction Manual

Operating Procedures for V.C.I. Stand-alone Diagnosis

7-1 Operating Procedures for V.C.I. Stand-alone Diagnosis
7-1-1. Transfer function of the database for V.C.I.
Stand-alone diagnosis
(1) Insert the memory card into the card adaptor, and then
insert them into m-card slot on PC.
(2) Select function
Select the Special Function button from the function
selection menu to enter special function mode.
Select the V.C.I. Stand-alone Diagnosis button
(3) Select removable media
--- The Database, which is only for V.C.I. Stand-alone
diagnosis, is transferred to the selected removable
media(removable disk drive).
Database Transfer procedure written above has completed,
remove the memory card from PC after stopping memory
card by the procedures refer to [3-6].
(4) Insert the memory card, which is storing V.C.I. stand-alone
diagnosis data, into the card adaptor, then insert them into
V.C.I. main unit.
66