D、Installation Requirements - Baldor BD Series User Manual

Screw air compressor
Table of Contents

Advertisement

BALDOR AIR COMPRESSOR
d、INSTALLATION REQUIREMENTS
1. Leave enough room for repairing and maintaining the air compressors.
2. The ground is best to be smooth cement floor. The air compressor base should be placed at
the concrete platform above the ground 150 mm high, and platform levelness is not more than
0.5/1000 (mm). And there should be grooves around and on the platform, and then the oil and
water can flow away through the groove when stopping the machine for changing oil,
repairing or washing the ground. The size of the groove is decided by the user.
3. Make sure the bottom of the compressor is placed evenly on the platform, which can
minimize vibration and noise.
4.
For users in good economic condition, acoustic board can be fixed on the inner wall to
further reduce the noise, but should not use ceramic tile or the other hard surface materials.
.
5.
Air cooled type compressor is much influenced by environmental temperature, so the
room should be ventilated, dry, inner with exhaust fan. The environment temperature of
compressor should be controlled within - 5 ℃ ~ 40℃.
6. The air of workshop should be clean, no dust, harmful gases, sulfurous acid and the other
corrosive medium.
7.
Air compressor is heating equipment, especially the cooled type compressor, so the
ventilation of workshop is very important. It is necessary to install the air draft equipment in
accordance with the outside wind orientation. The pumping volume must be higher than that
of air compressor cycle fan or cooling fan, and cooling air inlet area should be large enough.
Also can install a guiding wind hood at the top of the air compressor's air exhaust fan, which
can siphoned off the hot air discharged by the air compressor through the pipe to maintain
the room temperature within 5 ~ 40 ° C.
When using exhaust pipe, leave enough space to install canvas active connector for
maintenance (for example, when cleaning cooling unit, there's enough space dismantling
compressor cover and the other parts).
8

Advertisement

Table of Contents
loading

Table of Contents