Chapter Eight:common Faults And Processing - Baldor BD Series User Manual

BALDOR AIR COMPRESSOR
Chapter Eight: Common Faults and Treatment
faults
the compressor
can not start
Inlet valve get stuck in the closed
compressor
position, and the small hole blocked.
can not set up
e
pressure
reasons
The fuse is burned.
owe phase or "start" button in bad contact
set exhaust pressure wrongly
the motor overload protection trip/
damage
AC contactor faults
air end faults
minimum pressure valve leak air
lectromagnetic valve does not work
the air filter core is seriously blocked
check & maintain the motor/
waiting for the motor cooling
check & handle & replace
Check and moved the air
check the e
clean/replace the filter core
30
treatment
check and replace it
Check and replace it.
re-set it
end.
check & adjust
check & adjust
lectromagnetic
valve/circuit