Adjustment Of The Light Settings - Valkee HumanCharger User Manual

2.2. Adjustment Of The Light Settings

On first use, the session starts with the default
bright light settings (12 minutes). If you feel that the
intensity is disturbing adjust the light settings:
1. Turn off the device.
2. Press the power button for three seconds
to reduce the length of the session by three
minutes and the intensity of the bright light by
25%. For further reduction, keep holding down
the power button. The device saves your new
settings to the LEDSet.
3. If you want to return to the default setting,
keep holding the power button until 12 minute
setting is restored.
3 SEK
9 MIN
10
12 MIN
3 MIN
6 MIN