Sony Ericsson F500 Working Instruction, Electrical page 6

Hide thumbs Also See for F500:

Step-by-Step Instructions

Remove the shield can lid.

If needed it is allowed to remove the pick up

area with a cutting pliers (1). This pick up area is

only used when machine mounting the can and

there is no need to put it back again.

NOTE!

Assure that the cutting pliers is sharp-edged to

prevent damaging the shield can

Cut the fence according to the red lines in the

picture.

Form the frame carefully without bending the

shield can fence wall. Use Shield fence pliers

NTZ 112 537.

Replace the component and gently fold back the

fence. Be very cautious with the shield can fence

wall.

Put back a new shield can lid. Press on all sides

of the lid until you hear a "click" sound.

•

Reassemble the phone as described in Working Instruction 3/00021-1/FEA 209 544/86

3/00021-2/FEA 209 544/86 C



Company Internal

Sony Ericsson Mobile Communications AB

fence.

Working Instruction, Electrical

6(9)

Table of Contents

K500 K 500i