AIPTEK IS-DV User Manual page 44

When connecting the camera to the computer or TV:
Problem
I cannot view the
video clips on my
computer.
Driver installation
failed.
The TV screen
does not display
after connecting the
camera to the TV.
A conflict with other
installed camera
or capture device
occurred.
Noises occur on my
computer screen
when using Video
Conferencing.
Addenda
Cause
Driver or software is
not installed on the
computer.
The installation is
terminated abnormally.
The camera has been
connected to the PC via
the USB cable before
installing the driver.
The camera is not
correctly connected to
the TV.
The device is not
compatible with the
camera.
The flicker setting does
not match the standard
of the country you are
staying.
44
Solution
Install Direct X 8.0 or
above and Windows Media
9.0 Codecs to solve this
problem. See page 29 for
details on installing the
software, or go to http://www.
microsoft.com to download
the required files.
Remove the driver and other
related programs. Follow
the installation steps in
the manual to re-install the
driver.
Install the driver before
plugging in the USB cable.
Reconnect the camera to TV
correctly.
If you have any other camera
or capture device installed
in your computer, please
completely remove the
camera and its driver from
the computer to avoid the
conflict.
Adjust the flicker setting. For
more information, please
refer to the "Flicker Settings"
table on page 45.