Advertisement
Notes on using Wireless LAN (Wi-Fi
®
) function
®
®
• Use wireless LAN (Wi-Fi
) function in Japan. The wireless LAN (Wi-Fi
) function of the product conforms to domestic wireless
standards in Japan, and has been certified. Use of it overseas may be subject to punishment by law.
• The 2.4 GHz band used by wireless LAN (Wi-Fi
®
) devices is operated by various other devices. For this reason, the
communication speed and connectable range may be decreased, or disconnection may occur, due to interference by other
devices.
• Do not use the product in places near electric products, AV and OA equipment or other magnetized devices, or where
electromagnetic waves are generated.
• Subjecting the product to magnetic or electrical noise might increase noise and hinder the communications. (The product is
particularly susceptible to noise when it used near a microwave oven.)
• Using the product near a TV, radio or similar appliance might cause reception interference and disrupt TV images.
• Searching might not be successful if there are multiple wireless LAN (Wi-Fi
channel is being used.
• The communication speed and connectable range vary depending on the distance between communication devices,
obstacles and the devices used.
Cautions on using 2.4 GHz band
Wireless LAN (Wi-Fi
®
) function of the product uses 2.4 GHz band. In this frequency band, other similar wireless stations, in-
plant wireless stations for mobile unit identification that require a license to use, such as factory production lines, specific small
power wireless stations that do not require licenses, amateur wireless stations (collectively called "other wireless stations" from
here on) are operated in addition to home electrical appliances such as microwave ovens, devices for industrial, scientific and
medical devices.
1. Before using the product, make sure that "other wireless stations" are not in operation nearby.
2. In the event that instances of radio wave interference have occurred between the product and "other wireless stations",
immediately either relocate the product or stop operation of the device (stop emission of radio waves).
3. If you are unclear on any points or are troubled by anything, contact an au shop or Customer Service Center.
• Connections between the product and all wireless LAN (Wi-Fi
®
) devices have not been confirmed. Therefore, connections
with all wireless LAN (Wi-Fi
®
) devices are not guaranteed.
• The product supports security features for wireless communications that are compliant with the wireless LAN (Wi-Fi
standard specifications, but the security may not be sufficient depending on the usage environment and configuration. Be
careful when making data communication using wireless LAN (Wi-Fi
®
) function.
• Wireless LAN (Wi-Fi
®
) has the advantage that it can be freely connected anywhere within the radio wave range, as it uses
radio waves for exchanging information. At the same time, there is a risk that a malicious third party may obtain unauthorized
access if security settings have not been configured. You are recommended to configure security settings before using it at
your decision and responsibility.
• The Company assumes no responsibility for leakage of data or information that may occur during wireless LAN (Wi-Fi
communication.
The product uses the 2.4 GHz band. DS-SS and OFDM are used as the modulation schemes. The interference distance is
about 40 m or less. This means that all bandwidths are used, and that bands of mobile unit identification devices can be
avoided.
Cautions on using 5 GHz band
Wireless LAN (Wi-Fi
®
) function of the product uses 5 GHz band. Using the 5.2 GHz band and 5.3 GHz band outdoors is
prohibited by the Radio Law.
The channels used on the product are as follows.
W52 (5.2 GHz band/36, 40, 44, 48 ch)
W53 (5.3 GHz band/52, 56, 60, 64 ch)
W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch)
PIN code
■ PIN code
● To prevent unauthorized use of the au IC card by a third party, you can set the product to require PIN code entry every time
the power is turned on. You need to enter the PIN code when setting whether to enter the PIN code or not.
● If the PIN code is incorrectly entered three times consecutively, the PIN code will be locked. You can unlock the PIN code
using PUK code.
* By default setting, PIN code is "1234" and PIN code entry is not needed. However, you can change the PIN code to any
four- to eight-digit number and PIN code entry setting (entry is needed) as necessary. When an entry of security code is
required for making settings, change the initial value of the security code to your own number and then use it.
*PIN code is not reset by resetting the product.
■ PUK code
● In case the PIN code is locked, you can unlock it by entering the PUK code.
* PUK code is an eight-digit number given at the time of purchase, and is printed on the back side of the plastic card on
which your au IC card is attached.
*After entering the PUK code, you need to set a new PIN code in "PIN Code Management".
* If the PUK code is incorrectly entered ten times consecutively, contact an au shop or Customer Service Center.
Notes on data communication charge
• Since a constant Internet connection is possible with the product, data communication may be performed automatically.
• To configure various settings, connection to the Internet is required, to which data communication charge applies.
After-sales service
■ When asking for repair
During the warranty
Repairs will be done based on the terms of services of the free-of-charge repair warranty
period
described on the warranty card.
Outside the warranty
We shall repair the product for a charge as requested by the customer if repair renders it usable.
period
* The warranty period is one year from the day you purchased the new product.
• Before handing in the product for repair, make a backup of the contents of memory since they may disappear during repair.
Note that the Company shall not be liable for any damages and loss of income should the contents of memory be altered or lost.
• Recycled parts that meet the Company's quality standards are sometimes used for repair.
• Modified, remodeled, analyzed (including software alteration, analysis (including rooting), reverse engineering, decompiling,
or disassembling) products, or products repaired by repair offices other than the Company etc. specified are out of warranty
and repairs might be refused.
■ Performance parts for repair
The Company retains performance parts for repair of Speed Wi-Fi HOME L01 main unit and its peripherals for four years after
discontinuation of production.
"Performance parts for repair" refers to parts required for maintaining the functions of the product.
■ Warranty card
At the store of purchase, thoroughly check and read the name of the retailer, date of purchase and other necessary details filled
in on the warranty card, and be sure to keep it in a safe place.
■ au IC card
The au IC card is lent to you by au. In case of loss or damage, the card will be replaced at your expense. When malfunction is
suspected, or in case of theft or loss, contact an au shop or PiPit.
■ After-sales service information
Service
1st year
Spontaneous failure
2nd year or later
Holding over and repair
Partially damage
Water soak, irreparable damage
Loss, theft
Export Administration Regulations
The product and its accessories may be subject to the Japan Export Administration Regulations ("Foreign Exchange and
Foreign Trade Law" and its related laws). In addition, U.S. Re-export Regulations (Export Administration Regulations) may apply
to the product and its accessories. To export and re-export the product and its accessories, take the required measures on your
responsibility and at your expenses. For details on the procedures, contact the Ministry of Economy, Trade and Industry or the
U.S. Department of Commerce.
Trademarks
• Wi-Fi
®
, Wi-Fi Alliance
trademarks of Wi-Fi Alliance.
®
) access points near to the product or the same
• HUAWEI is a registered trademark or trademark of HUAWEI TECHNOLOGIES CO., LTD. in China.
• Other company names and product names referred to in this manual are trademarks and registered trademarks of respective
companies. The
®
Policy on the protection of personal information
Please refer to the websites listed below if you would like more detailed information regarding the HUAWEI TECHNOLOGIES
CO., LTD. policy on the protection of personal information.
http://consumer.huawei.com/en/privacy-policy/index.htm
For inquiries
Customer Service Center
For general information, charge and
operation information
Business hours : 9:00-20:00 (7 days a week)
From fixed-line phones:
0077-7-111
®
)
Pressing "zero" will connect you to an operator,
after calling "157" on your au cellphone.
Repair and Delivery Service Center
For loss, theft, damage
®
)
From fixed-line phones/au mobile phones,
0120-925-919
Business hours : 9:00-20:00 (7 days a week)
Recompense
Free of charge
Actual cost
No recompense
®
, Wi-Fi CERTIFIED
®
, WPA™, WPA2™, Wi-Fi Protected Setup™ logos are registered trademarks or
marks or TM marks may be omitted in this manual.
For loss, theft or damage
(toll-free)
(toll-free)
Business hours : 24 hours (7 days a week)
From au mobile phones:
From fixed-line phones:
From au mobile phones:
0077-7-113
157
113
without area code
without area code
In case above numbers are not available, call (toll-free)
0120-977-033
(except Okinawa)
(toll-free)
0120-977-699
(Okinawa)
December 2016, 1st Edition
Sold by: KDDI CORPORATION, OKINAWA CELLULAR
TELEPHONE COMPANY
Imported by: HUAWEI Technologies Japan K.K.
Manufactured by: HUAWEI TECHNOLOGIES CO., LTD.
Advertisement
