Table of Contents
Advertisement
UIC680 Programmer's Manual
After power up the device, the first right vertical LED is turned on with one beep sound
indicating that the reader is ready to operate.
As factory default setting, UIC680 is set to Self-Arm mode enabled. Under this mode, the
reader will read and transmit payment card
mode in order to send contactless card operation commands.
4.1 Reader Default Setting
Item Description
UART1 setting (Txd1/Rxd1)
Data pass through mode
UART2 setting (Txd1/Rxd2)
USB Interface
Buzzer
Protocol format
Contactless Self-Arm mode
Contactless smart card manual type
(only available in host poll mode)
Optional functions for the variant versions
Google application
Administration command protect
Data Encryption
Crypto Algorithm
DUKPT Key Management Mode
Pre-load encryption key
Pre-load Google Wallet merchant keys
1
Payment card – the card with MasterCard PayPass, VISA payWave, ExpressPay, or Discover Zip application.
2
Please contact UIC support team for more detail information.
Section 4: Operation
1
data automatically. User needs to disable this
2
EEPROM Default Value
9600-8-N-1
Disable
38400-8-N-1 (optional)
USB HID Keyboard
Enable
Protocol 0 (USI0)
Enable
Type A
Mifare First
Enable
Enable
TDES
Auto rollover 1
(Customer specific or UIC default)
Yes (per merchant request)
UDN PM090-C2 Rev. 2.3
4-1
Advertisement
Table of Contents
