Page 1
CDR Positioning System User Guide Schick Technologies, Inc. 30-00 47 Avenue Long Island City, NY 11101 (718) 937-5765 (718) 937-5962 (fax) PART NUMBER B1051044 REV. B...
Page 2
All Rights Reserved CDR and CDR Wireless are trademarks of Schick Technologies, Inc. CDR is a registered trademark and is covered by US Patent Numbers 5,912,942 and 6,134,298. Additional patents are pending. Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks.
Contents 1. Introduction................... 1 1.1. Welcome ...........................1 1.2. Your CDR Positioning System ....................1 1.3. Using Sensor Sheaths........................1 1.4. Using Aiming Rings and Arms ....................1 2. Procedures..................2 2.1. Sheath Placement (Wired Sensors) ...................2 2.2. Sheath Placement (Wireless Sensors) ..................3 2.3. Universal Bite Tab Holder ......................4 2.4.
Page 4
When used correctly, sheaths provide an effective barrier against exposure to bacteria and infection. Use new Sensor sheaths and holders for each new patient. The sheath is an integral part of the CDR system and must always be placed over the Sensor before positioning the holder.
1.2. Your CDR Positioning System Each tab type in the CDR Positioning System is color-coded and area-specific, so you can always find the right tab for the intraoral areas you intend to X-ray. The CDR Positioning System contains the following tabs: •...
Wired Sensor Slide the Sensor into the Sheath Position the Holder on the Sheath (Actual position will vary with holder and area to be X-rayed. Continue with the following paragraphs for specific placement information) B1051044 Rev. B CDR Positioning...
C. Tear the excess length from the Sheath along the perforated seam. Position the Holder on the Sheath (Actual position will vary with holder and area to be X-rayed. Continue with the following paragraphs for specific placement information) CDR Positioning B1051044 Rev. B...
2.3. Universal Bite Tab Holder REFERENCE This tab is color-coded RED. As an example, tab placement on a CDR wired Sensor sheath is shown below. Placement on wireless Sensor sheaths is identical. ILLUSTRATION Placing Bite Tab on Sheath Placing Bite Tab on Sheath...
2.4. Universal Endodontic Tab Holder REFERENCE This tab is color-coded GREEN. As an example, tab placement on a CDR wired Sensor sheath is shown below. Placement on wireless Sensor sheaths is identical. ILLUSTRATION Placing Endodontic Tab on Placing Endodontic Tab on...
2.5. Universal Anterior Periapical Tab Holder REFERENCE This tab is color-coded WHITE. As an example, tab placement on a CDR wired Sensor sheath is shown below. Placement on wireless Sensor sheaths is identical. ILLUSTRATION Placing Anterior Tab on Placing Anterior Tab on...
2.6. Universal Bitewing Tab Holder REFERENCE This tab is color-coded BLUE. As an example, tab placement on a CDR wired Sensor sheath is shown below. Placement on wireless Sensor sheaths is identical. ILLUSTRATION Placing Bitewing Tab on Placing Bitewing Tab on...
2.7. Universal Posterior Periapical Tab Holder REFERENCE This tab is color-coded YELLOW. As an example, tab placement on a CDR wired Sensor sheath is shown below. Placement on wireless Sensor sheaths is identical. ILLUSTRATION Placing Periapical Tab on Placing Periapical Tab on...
Schick Technologies products. 3.2. Product Support and Service In the event you have questions about your CDR Positioning System or require assistance from us, please contact your local distributor for our products in the United States, or the authorized international dealer for Schick Technologies products in your country or region.
Need help?
Do you have a question about the CDR and is the answer not in the manual?
Questions and answers