Schick CDR Elite Care Manual

SensorCareGuide CMYK:SensorCareGuide.1 2/25/09
C A B L E C A R E
I '
MPROPER COILING OF A SENSOR S CABLE IS THE MOST COMMON CAUSE OF
. I
SENSOR FAILURE T IS IMPORTANT THAT THESE INSTRUCTIONS ARE
:
FOLLOWED TO PREVENT CABLE DAMAGE
PLEASE
DO grasp the connector, not the cable, when disconnecting the sensor
from the USB remote, and pull gently.
DO follow the sensor sheath removal procedure as illustrated in this
guide.
DO be as gentle as possible.
DO store the sensor in its holster (PN B1070025) when it is not in use.
PLEASE
NEVER
ONCE UNPACKED, COIL THE SENSOR CABLE.
Repeated coiling of the sensor cable may cause kinks and
irreversible damage.
DON'T let the cable hang on or near the floor where it can
become tangled.
DON'T let the cable hang near a drawer where it can be
kinked/crimped.
DON'T pull on the cable to remove from tab, holder or sheath.
DON'T tangle the cable during use.
DON'T create sharp bends and/or knots when untangling.
Proper storage of
sensor in holster
In the United States, customers can contact the Patterson Technology Center
at 877-498-6505. Other customers please contact the authorized dealer for
Schick Technologies products in your country or region.
T h e f u t u r e i s h e r e .
Printed copies of this document are considered uncontrolled.
11652.1.Rev001 04.21.2015
4:52 PM Page 1
30-30 47th Avenue, Suite 500 Long Island City, NY 11101
B1207080 Rev-
T
H I S S H O U L D
B E R E A D B Y
E V E RYO N E
.
O N YO U R S TA F F
S C H I C K T E C H N O L O G I E S I N C .
www.schicktech.com
S E N S O R
C A R E G U I D E
Protect your sensors.
Protect your investment.
PLEASE READ THIS.
T h e f u t u r e i s h e r e .