Plumbing Connections - Champion Eseries HRU Installation/Operation Manual With Service Replacement Parts

Refer to the photograph below and follow the instructions to connect the
water lines to the HRU.
Connect compression fittings from the cold water supply line located
1.
at the base of the dishwasher booster heater to the HRU.
Connect compression fittings from the HRU return line at the rear
2.
of the HRU to the booster inlet located at the base of the machine.
3. Connect the red drain hose from the base of the HRU to the
fitting on the rear drain line of the dishwasher. The fitting is located
directly below the HRU drain line.
HRU WATER
OUT
Heat Recovery Unit (HRU) water and drain lines are connected at the rear of the dishwasher.
COLD WATER
IN
HRU DRAIN
OUT
Installation
Installation

Plumbing Connections

5