HealTech Electronics Maintenance Mate User Manual

Maintenance Mate
Maintenance Mate
Service light reset tool for Triumph motorcycles | Model: MM-T01
Service light reset tool for Triumph motorcycles | Model: MM-T01
1. Foreword
1. Foreword
Before using this product please ensure the bike is
Before using this product please ensure the bike is
compatible with this tool. Check the part number
compatible with this tool. Check the part number
on the packaging and use the Product Advisor
on the packaging and use the Product Advisor
on our website to check compatibility. For more
on our website to check compatibility. For more
information on this product, please visit:
information on this product, please visit:
www.healtech-electronics.com/MM
www.healtech-electronics.com/MM
Congratulations on
Congratulations on
Maintenance Mate service light reset tool.
Maintenance Mate service light reset tool.
Products from HealTech Electronics Ltd. are the
Products from HealTech Electronics Ltd. are the
most advanced aftermarket accessories and
most advanced aftermarket accessories and
maintenance tools for motorcycles.
maintenance tools for motorcycles.
The Maintenance Mate is compatible with
The Maintenance Mate is compatible with
a wide range of Triumph motorcycles (2010
a wide range of Triumph motorcycles (2010
onwards, depending on model) that have a service
onwards, depending on model) that have a service
interval indicator light (small wrench symbol) on the
interval indicator light (small wrench symbol) on the
dashboard.
dashboard.
2. Features
2. Features
 Touch control
 Touch control
Set the next interval with ease using the touch
Set the next interval with ease using the touch
pads. Works with both Km/h and MPH-based
pads. Works with both Km/h and MPH-based
dashboards. The touch-sensitive area is marked
dashboards. The touch-sensitive area is marked
with arrow signs pointing up and down on the
with arrow signs pointing up and down on the
face of the unit.
face of the unit.
 Built to last
 Built to last
- Rugged design, potted with epoxy resin.
- Rugged design, potted with epoxy resin.
- Only high-quality SMD components used.
- Only high-quality SMD components used.
- Each unit is extensively tested prior to shipping.
- Each unit is extensively tested prior to shipping.
- Oil and water resistant (IP68).
- Oil and water resistant (IP68).
3. Warranty
3. Warranty
HealTech Electronics Ltd. guarantees this product
HealTech Electronics Ltd. guarantees this product
against defects in material and workmanship for a
against defects in material and workmanship for a
period of one (1) year.
period of one (1) year.
4.
Specifications
4.
Specifications
- Supply voltage: +8V to +24V
- Supply voltage: +8V to +24V
- Maximum supply current at 12V: 60 mA
- Maximum supply current at 12V: 60 mA
- Reverse polarity and transient protection
- Reverse polarity and transient protection
MM-T01 User's Guide [rev. 002]
MM-T01 User's Guide [rev. 002]
your purchase of
your purchase of
User' s Guide
User' s Guide
When the ignition key is switched on and the
When the ignition key is switched on and the
distance to service is 800 km (500 miles) or less, the
distance to service is 800 km (500 miles) or less, the
service symbol will be displayed for 3 seconds and
service symbol will be displayed for 3 seconds and
the dash will show the distance remaining.
the dash will show the distance remaining.
When the remaining distance is 0 km (0 miles),
When the remaining distance is 0 km (0 miles),
the service symbol will stay permanently on until
the service symbol will stay permanently on until
a the service has been carried out and the service
the service has been carried out and the service
a
interval has been set. If the service is overdue, the
interval has been set. If the service is overdue, the
distance will be displayed as a negative number or
distance will be displayed as a negative number or
you will see an OVERDUE warning with the wrench
you will see an OVERDUE warning with the wrench
symbol (depending on the bike model).
symbol (depending on the bike model).
The Maintenance Mate will set the service
The Maintenance Mate will set the service
interval on the bike without the need for a complex
interval on the bike without the need for a complex
and expensive OBD tool. Faster, easier and more
and expensive OBD tool. Faster, easier and more
efficient for busy workshops.
efficient for busy workshops.
 Cost effective option
 Cost effective option
Save on service bills! The MM is an economical
Save on service bills! The MM is an economical
solution for bike owners who can do their own
solution for bike owners who can do their own
maintenance.
maintenance.
Save on servicing time! No need for laptops or
Save on servicing time! No need for laptops or
dedicated OBD tools. Faster turnaround and
dedicated OBD tools. Faster turnaround and
lower costs for workshops.
lower costs for workshops.
 Light and small
 Light and small
The unit itself is hardly larger than the OEM
The unit itself is hardly larger than the OEM
diagnostic connector it connects to.
diagnostic connector it connects to.
The warranty period starts from the date of the
The warranty period starts from the date of the
original purchase as shown on the invoice.
original purchase as shown on the invoice.
- Unit size: 59 x 35 x 18 mm (2.3 x 1.3 x 0.7 inches)
- Unit size: 59 x 35 x 18 mm (2.3 x 1.3 x 0.7 inches)
- Operating temp: -40C to +80C (-40F to +176F)
- Operating temp: -40C to +80C (-40F to +176F)
- Waterproof (IP68)
- Waterproof (IP68)
www.healtech-electronics.com/ MM
|
| www.healtech-electronics.com/ MM