Freecooler Operation - DECRYPTUM PR 2080TI/12 4U User Manual

4. FREECOOLER
OPERATION
4.1 Starting, self-diagnostic and errors
The preliminary stage, performed only when freecooler is powered first
time or after power loss recovery. In case of performing a Computing unit
regular shutdown without removing the connection voltage, the freecooler
automatically goes into standby mode until it is turned on again.
Self-diagnostic.
When freecooler is powered, the self-diagnostic procedure begins
and the display successively shows:
FREECOOLER START
DECRYPTUM PR 2080TI/12 4U. USER MANUAL
(rev. 1.03)
COM INO
F/W
XXXXXXXXXXX
COM INO
SELFCHECK
VER:
12