meibes Rossweiner Logosonic Installation Manual page 11

5. Commissioning
Sequence when making changes
When pressing and holding down the key for a further >6 s, the meter performs the command shown in the
display.
After changing 8 times, it is no longer possible to change the installation position.
The ability to make changes either ends immediately with the detection of water or after three hours in
operation without having identified any faults (preadjusted in the factory).
The following appears in the display (example):
Key pressed <3 s
With every change, the framed number in the
display reduces by 1.
Display for making changes disappears.
Key pressed >3 s
27